Fume Hood

A B C D
Working chamber 2’X2’X2’ 3’X2’X2’ 4’X2’X2’ 6’X2’X2’

AIR CURTAIN

Very useful to curtain of air between air conditioned and clean room to adjoining room. Widely used in various applications in industry, Hospitals, Hotels, Showrooms etc.

Door Width

  • 600mm
  • 900mm
  • 1200mm
  • 1500mm
  • 1800mm

INOCULATION CHAMBER

Economical clean air chamber for transfer of tissues and other tissues culture work and use as a dry box and by dust proof bacteria free clean uncontaminated environmental enclosure. Fabricated out of thick ply clad, externally laminated sheet/ polished and inner exposed areas painted with chemically resistant Epoxy paint. It’s provided with tightly covered rectangular opening on one side for putting in the material. A clear fixed acrylic sheet window provided in front for observation. Complete with fluorescent lighting germicidal ultra violet tube.

A B
Working chamber 3’X2’X5’ 4’X2’X5’
Size of HEPA Filter 3’X1 1/2’X6’ 4’X1 1/2’X6’
No. of HEPA Filter 1 1
No. of Pre Filter 1 2

Optional:

Exhaust Ducting per running ft.

Also Available in:

a)M.S. powder coated.

b)Stainless steel.

MATERIAL STORAGE CABINET (Vertical Flow)

All specification and sizes are same as above but three shelves are provided in material storage cabinet for storing material.

Optional:

Exhaust Ducting per running ft.

Also Available in:

a)M.S. powder coated.

b)Stainless steel.

SLIDE CABINETS

Economical the anodized aluminum side tray for holding 75×25 mm slides have been arranged separately to as not to disturb other compartments while taking out or putting in slides. Made of thick ply board laminated with sun mica. Smoothly working doors fitted with handle lock & key.

Available in following capabilities

  • 1000 Slides
  • 2000 Slides
  • 5000 Slides
  • 10000 Slides
  • 20000 Slides
Category:

Description

Fabricated out of thick wooden board. It designed so as to throw out all toxic/ harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sun mica and inner epoxy painted. Working table is acid / alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/ air supply. The front facing panel is fitted with 15/5 Amp. Socket with switches for exhaust system and fluorescent light. To work on 220 volts A.C. 50 Hz supply.

Optional:

  • i) High CFM exhaust system ( for duct exceeding 10 feet in length)
  • ii) S.S. Lining on work bench.
  • iii)PVC Fume Duct (per ft.)

Also Available in:

a)M.S. Powder coated b)Stainless Steel

Reviews

There are no reviews yet.

Be the first to review “Fume Hood”

Your email address will not be published. Required fields are marked *

Related products

Quick Links
Products
Registered Office